Product description:
Cyanuric acid, also known as tricyanic acid;2, 4, 6-trihydroxy 1, 3, 5-triazine;2,4,6 trihydroxy -triazinettriol (2, 4, 6-triazinettriol);Sym - triazinetriol.White crystal, separated from water, with two crystalline water.Slightly bitter, basically non-toxic, soluble in hot water, slightly soluble in cold water, aqueous solution is acidic, soluble in potassium hydroxide and sodium hydroxide aqueous solution, insoluble in cold alcohol, ether, benzene and other organic solvents.
Application Method:
1. The product shall be diluted with 10-40 times water and then dosed into the waste water directly. After being mixed for several minutes, it can be precipitated or air-floated to become clear water.
2. The pH value of the waste water should be adjusted to 6-10 for better result.
3. When the colority and CODcr are relatively high, it can be used with the help of polyaluminum chloride, but not mixed together. In this way, the treatment cost can be lower. Whether polyaluminum chloride is used earlier or afterwards depends on the flocculation test and the treatment process
© 2017 - 2021 China Chemicals Used To Purify Water Supplier All Rights Reserved