Water Purification :: Washington State Department of HealthPurifying by adding liquid chlorine bleach. Treat water by adding liquid household bleach, such as Clorox or Purex. Household bleach is typically between 5.25 percent and 8.25 percent chlorine. Avoid using bleaches that contain perfumes, dyes and other additives. Cloudy water should be filtered before adding bleachWhat is Chlorination? — Safe Drinking Water FoundationJan 23, 2017 - Chlorination is one of many methods that can be used to disinfect water. This method was first used over a century ago, and is still used todayChlorination | Water Purification | Chlorine - WaterProfessionalsChlorination involves adding a measured amount of chlorine to water to produce a residual sufficient to kill bacteria, viruses, and cysts. The killing effect of chlorine Emergency Disinfection of Drinking Water | Ground Water andSep 7, 2017 - Disinfect water using household bleach, if you can't boil water. Only use regular, unscented chlorine bleach products that are suitable for chlorine as disinfectant for water - LenntechChlorine is one of the most commonly used disinfectants for water disinfection. chlorine gas is only used for large municipal and industrial water purification Water chlorination - WikipediaWater chlorination is the process of adding chlorine or chlorine compounds such as sodium Chlorine gas was first used on a continuing basis to disinfect the water supply at the Belmont filter plant, Philadelphia, Pennsylvania by using a Disaster Preparedness and Purifying Water | Clorox®Oct 31, 2012 - Just add the same amount of bleach, and wait for another 15 minutes. Check again for the chlorine odor before drinking the water